Documents / Manuals / Software. Download type Filter. Ultrasonic Level Measurement. Prosonic T FMU30. Ultrasonic Level Measurement Compact transmitters for non-contact level measurement of fluids, pastes and coarse bulk materials. Cost-effective level measurement. Endress+Hauser non-contact radar measures level in corrosive chemical tanks.
Prosonic FMU 860.862 Measuring System Measuring System The measuring system consists of the Prosonic transmitter with a Prosonic sensor chosen according to the application at hand. The twochannel version is for differential measurement or for controlling two measuring points. The certified sensor ensures that the measuring system can be used in explosion hazardous areas. Other units can be connected to the Prosonic transmitter for special applications: • separate temperature sensor, e.g. If the ultrasonic sensor is heated • separate external limit detector.
The Prosonic transmitter can be integrated into automation systems using the RS-485 or PRO- FIBUS-DP interface. FMU 860 or or FMU 862 FMU 860 FDU ATEX Zone 1 FDU EX ATEX Zone 20 Overspill protection Double protection against overfill: • All Prosonic transmitters have an additional connection for an external limit detector. • Even when the level moves within the blocking distance of the sensor, this is promptly indicated by the display, the signal output and relays.
FMU 86 FDU Max. 2 Endress+Hauser Prosonic FMU 860.862 Applications Prosonic FMU 860 Level FMU 860 FMU 860 L FDU FDU • Continuous level and volumetric measurement of liquids and solids in tanks and silos. • Pump control in up to 5 steps • Alternating pump control • Adjustable switch delay • Conveyor belts rapid changes in load height are easily dealt with by the Prosonic FMU 860.
Prosonic FMU 861 • Flow rate measurement in flumes or weirs • Millimeter accuracy for the flow level • The linearisation curves of all common standard flumes and weirs are preset and can be called up as required. • For the version with IP 66 housing, the amount flowing through is summated and displayed by the totaliser • Low-flow cut-off • Separate display of floodwater on external counters • Sample control using a quantity or time function FDU Flow FMU 861 Q 1 2 3 4 5 6 EX ATEX Zone 1 Prosonic FMU 862 Two channel version • Flow or level measurement in channel 1; level measurement in channel 2 • Differential and average value measurement ( FMU 862 D for distance measurement with two sensors) • E.g.
Controlling the screen cleaning process as a function of clogging (s. Fig.) • Superimposed interval timer • Trend indication • Back water alarm (Back water in weirs is detected, signalled and the flowrate automatically adjusted) FDU FMU 862 Differential Dh FDU Endress+Hauser 3.
• Operating Instructions Prosonic S FMU90 Level Measurement Alternating Pump Control Rake Control BA288F/00/en/10.07 Valid as of software version 02.00.00. • 'back to home'.75 Parts of the Prosonic S FMU90.7 The 'Relay/Controls'. • Table of Contents Technical Data.160 13.1 Technical data at a glance.160 Operating menu. • Safety Instructions Designated use The Prosonic S FMU90 is a transmitter for the ultrasonic sensors FDU91, FDU91F, FDU92, FDU93, FDU95 and FDU96. The sensors of the former class FDU8x can be connected as well. The transmitter version for level measurements (product structure according to section 2.3: FMU90 - *1**********) can be applied for different measuring tasks, e.g.
• Safety Instructions Notes on safety conventions and symbols In order to highlight safety-relevant or alternative operating procedures in the manual, the following conventions have been used, each indicated by a corresponding symbol in the margin. Safety conventions Warning! A warning highlights actions or procedures which, if not performed correctly, will lead to personal injury, a safety hazard or destruction of the instrument '. • Identification Identification Parts of the Prosonic S FMU90 2.1.1 FMU90 in the field housing 9 Ma 0- J1 ni c P ro M A4 r Co / NE r.- No 4 °C x° C > 60 II 3. • Identification 2.1.3 FMU90 with remote display and operating module for cabinet door and switchboard mounting (96x96 mm) u rg u lb 0 -J D -7 o.: O rd r.
Documents / Manuals / Software. Download type Filter. Ultrasonic Level Measurement. Prosonic T FMU30. Ultrasonic Level Measurement Compact transmitters for non-contact level measurement of fluids, pastes and coarse bulk materials. Cost-effective level measurement. Endress+Hauser non-contact radar measures level in corrosive chemical tanks.
Prosonic FMU 860.862 Measuring System Measuring System The measuring system consists of the Prosonic transmitter with a Prosonic sensor chosen according to the application at hand. The twochannel version is for differential measurement or for controlling two measuring points. The certified sensor ensures that the measuring system can be used in explosion hazardous areas. Other units can be connected to the Prosonic transmitter for special applications: • separate temperature sensor, e.g. If the ultrasonic sensor is heated • separate external limit detector.
The Prosonic transmitter can be integrated into automation systems using the RS-485 or PRO- FIBUS-DP interface. FMU 860 or or FMU 862 FMU 860 FDU ATEX Zone 1 FDU EX ATEX Zone 20 Overspill protection Double protection against overfill: • All Prosonic transmitters have an additional connection for an external limit detector. • Even when the level moves within the blocking distance of the sensor, this is promptly indicated by the display, the signal output and relays.
FMU 86 FDU Max. 2 Endress+Hauser Prosonic FMU 860.862 Applications Prosonic FMU 860 Level FMU 860 FMU 860 L FDU FDU • Continuous level and volumetric measurement of liquids and solids in tanks and silos. • Pump control in up to 5 steps • Alternating pump control • Adjustable switch delay • Conveyor belts rapid changes in load height are easily dealt with by the Prosonic FMU 860.
Prosonic FMU 861 • Flow rate measurement in flumes or weirs • Millimeter accuracy for the flow level • The linearisation curves of all common standard flumes and weirs are preset and can be called up as required. • For the version with IP 66 housing, the amount flowing through is summated and displayed by the totaliser • Low-flow cut-off • Separate display of floodwater on external counters • Sample control using a quantity or time function FDU Flow FMU 861 Q 1 2 3 4 5 6 EX ATEX Zone 1 Prosonic FMU 862 Two channel version • Flow or level measurement in channel 1; level measurement in channel 2 • Differential and average value measurement ( FMU 862 D for distance measurement with two sensors) • E.g.
Controlling the screen cleaning process as a function of clogging (s. Fig.) • Superimposed interval timer • Trend indication • Back water alarm (Back water in weirs is detected, signalled and the flowrate automatically adjusted) FDU FMU 862 Differential Dh FDU Endress+Hauser 3.
• Operating Instructions Prosonic S FMU90 Level Measurement Alternating Pump Control Rake Control BA288F/00/en/10.07 Valid as of software version 02.00.00. • 'back to home'.75 Parts of the Prosonic S FMU90.7 The 'Relay/Controls'. • Table of Contents Technical Data.160 13.1 Technical data at a glance.160 Operating menu. • Safety Instructions Designated use The Prosonic S FMU90 is a transmitter for the ultrasonic sensors FDU91, FDU91F, FDU92, FDU93, FDU95 and FDU96. The sensors of the former class FDU8x can be connected as well. The transmitter version for level measurements (product structure according to section 2.3: FMU90 - *1**********) can be applied for different measuring tasks, e.g.
• Safety Instructions Notes on safety conventions and symbols In order to highlight safety-relevant or alternative operating procedures in the manual, the following conventions have been used, each indicated by a corresponding symbol in the margin. Safety conventions Warning! A warning highlights actions or procedures which, if not performed correctly, will lead to personal injury, a safety hazard or destruction of the instrument '. • Identification Identification Parts of the Prosonic S FMU90 2.1.1 FMU90 in the field housing 9 Ma 0- J1 ni c P ro M A4 r Co / NE r.- No 4 °C x° C > 60 II 3. • Identification 2.1.3 FMU90 with remote display and operating module for cabinet door and switchboard mounting (96x96 mm) u rg u lb 0 -J D -7 o.: O rd r.
...">Endress Hauser Prosonic Fmu 860 Manual Espaol(18.11.2018)Documents / Manuals / Software. Download type Filter. Ultrasonic Level Measurement. Prosonic T FMU30. Ultrasonic Level Measurement Compact transmitters for non-contact level measurement of fluids, pastes and coarse bulk materials. Cost-effective level measurement. Endress+Hauser non-contact radar measures level in corrosive chemical tanks.
Prosonic FMU 860.862 Measuring System Measuring System The measuring system consists of the Prosonic transmitter with a Prosonic sensor chosen according to the application at hand. The twochannel version is for differential measurement or for controlling two measuring points. The certified sensor ensures that the measuring system can be used in explosion hazardous areas. Other units can be connected to the Prosonic transmitter for special applications: • separate temperature sensor, e.g. If the ultrasonic sensor is heated • separate external limit detector.
The Prosonic transmitter can be integrated into automation systems using the RS-485 or PRO- FIBUS-DP interface. FMU 860 or or FMU 862 FMU 860 FDU ATEX Zone 1 FDU EX ATEX Zone 20 Overspill protection Double protection against overfill: • All Prosonic transmitters have an additional connection for an external limit detector. • Even when the level moves within the blocking distance of the sensor, this is promptly indicated by the display, the signal output and relays.
FMU 86 FDU Max. 2 Endress+Hauser Prosonic FMU 860.862 Applications Prosonic FMU 860 Level FMU 860 FMU 860 L FDU FDU • Continuous level and volumetric measurement of liquids and solids in tanks and silos. • Pump control in up to 5 steps • Alternating pump control • Adjustable switch delay • Conveyor belts rapid changes in load height are easily dealt with by the Prosonic FMU 860.
Prosonic FMU 861 • Flow rate measurement in flumes or weirs • Millimeter accuracy for the flow level • The linearisation curves of all common standard flumes and weirs are preset and can be called up as required. • For the version with IP 66 housing, the amount flowing through is summated and displayed by the totaliser • Low-flow cut-off • Separate display of floodwater on external counters • Sample control using a quantity or time function FDU Flow FMU 861 Q 1 2 3 4 5 6 EX ATEX Zone 1 Prosonic FMU 862 Two channel version • Flow or level measurement in channel 1; level measurement in channel 2 • Differential and average value measurement ( FMU 862 D for distance measurement with two sensors) • E.g.
Controlling the screen cleaning process as a function of clogging (s. Fig.) • Superimposed interval timer • Trend indication • Back water alarm (Back water in weirs is detected, signalled and the flowrate automatically adjusted) FDU FMU 862 Differential Dh FDU Endress+Hauser 3.
• Operating Instructions Prosonic S FMU90 Level Measurement Alternating Pump Control Rake Control BA288F/00/en/10.07 Valid as of software version 02.00.00. • 'back to home'.75 Parts of the Prosonic S FMU90.7 The 'Relay/Controls'. • Table of Contents Technical Data.160 13.1 Technical data at a glance.160 Operating menu. • Safety Instructions Designated use The Prosonic S FMU90 is a transmitter for the ultrasonic sensors FDU91, FDU91F, FDU92, FDU93, FDU95 and FDU96. The sensors of the former class FDU8x can be connected as well. The transmitter version for level measurements (product structure according to section 2.3: FMU90 - *1**********) can be applied for different measuring tasks, e.g.
• Safety Instructions Notes on safety conventions and symbols In order to highlight safety-relevant or alternative operating procedures in the manual, the following conventions have been used, each indicated by a corresponding symbol in the margin. Safety conventions Warning! A warning highlights actions or procedures which, if not performed correctly, will lead to personal injury, a safety hazard or destruction of the instrument '. • Identification Identification Parts of the Prosonic S FMU90 2.1.1 FMU90 in the field housing 9 Ma 0- J1 ni c P ro M A4 r Co / NE r.- No 4 °C x° C > 60 II 3. • Identification 2.1.3 FMU90 with remote display and operating module for cabinet door and switchboard mounting (96x96 mm) u rg u lb 0 -J D -7 o.: O rd r.
...">Endress Hauser Prosonic Fmu 860 Manual Espaol(18.11.2018)