04
май
No portion of this manual or any artwork contained herein may be reproduced in any. SKU 69096 For replacement parts, please call 1-800-444-3353. A properly used multimeter measures both voltage and current for alternating current, or AC. The multimeter also measures voltage and current for direct current, or DC. Electronic hobbyists can also test diodes, resistors and transistors with the Cen-Tech 92020 digital multimeter.
Originally recorded March 22, 2014. This is a review of the Harbor Freight Cen-Tech 7 Function Digital Multimeter, Item # 6.
It likely also applies to its bigger brother, the 7 Function Digital Multimeter With Backlight, Item # 92020. This is a basic VOM. It's not necessarily of the greatest quality, but it can give you some reasonable measurements. Oftentimes, they have this item for FREE with a coupon, and for the low, low price of free you can't beat it. The best part is this meter is adjustable, which means you can make it read even closer to the actual measurement, if of course you already have a higher quality meter. It's great to have a few of these around, you can keep them in several places so you'll always have one on hand, such as the car, garage, workbench, basement, etc.
• 7 FUNCTION DIGITAL MULTIMETER 69096 OPERATING INSTRUCTIONS Visit our Web site at REV 12a Copyright 2011 by Harbor Freight Tools. All rights reserved. © ® No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. • Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Warnings continued on page 3. SKU 69096 For replacement parts, please call 1-800-444-3353. • Any part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not operate properly. SKU 69096 For replacement parts, please call 1-800-444-3353. • Do not test voltage on AC circuits higher than 750 volts. Do not test voltage on DC circuits higher than 1000 volts.
Opmanager license file crack free. Do not test current on circuits higher than 10 amps. SKU 69096 For replacement parts, please call 1-800-444-3353. • Measure DC conductors carrying up to 1000 VDC. Turn the Range Selector Switch to 1000 DCV setting. Follow the directions above under “AC Voltage Measurements”, only use the DC settings instead. SKU 69096 For replacement parts, please call 1-800-444-3353.
• Plug the red Test Lead into the VΩmA (Center) Jack. Plug the black Test Lead into the Com (Bottom) Jack. Switch the Multimeter ON. Connect the red probe to the anode of the diode and the black to the cathode. SKU 69096 For replacement parts, please call 1-800-444-3353. • Pull battery/fuse out of unit and replace with the same.
Metal roof hatch pattern for autocad. (9V battery or 500mA/250V fast-acting fuse) Replace cover and retighten screws. NOTE: No replacement parts are available for this tool.
SKU 69096 For replacement parts, please call 1-800-444-3353.
No portion of this manual or any artwork contained herein may be reproduced in any. SKU 69096 For replacement parts, please call 1-800-444-3353. A properly used multimeter measures both voltage and current for alternating current, or AC. The multimeter also measures voltage and current for direct current, or DC. Electronic hobbyists can also test diodes, resistors and transistors with the Cen-Tech 92020 digital multimeter.
Originally recorded March 22, 2014. This is a review of the Harbor Freight Cen-Tech 7 Function Digital Multimeter, Item # 6.
It likely also applies to its bigger brother, the 7 Function Digital Multimeter With Backlight, Item # 92020. This is a basic VOM. It's not necessarily of the greatest quality, but it can give you some reasonable measurements. Oftentimes, they have this item for FREE with a coupon, and for the low, low price of free you can't beat it. The best part is this meter is adjustable, which means you can make it read even closer to the actual measurement, if of course you already have a higher quality meter. It's great to have a few of these around, you can keep them in several places so you'll always have one on hand, such as the car, garage, workbench, basement, etc.
• 7 FUNCTION DIGITAL MULTIMETER 69096 OPERATING INSTRUCTIONS Visit our Web site at REV 12a Copyright 2011 by Harbor Freight Tools. All rights reserved. © ® No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. • Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Warnings continued on page 3. SKU 69096 For replacement parts, please call 1-800-444-3353. • Any part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not operate properly. SKU 69096 For replacement parts, please call 1-800-444-3353. • Do not test voltage on AC circuits higher than 750 volts. Do not test voltage on DC circuits higher than 1000 volts.
Opmanager license file crack free. Do not test current on circuits higher than 10 amps. SKU 69096 For replacement parts, please call 1-800-444-3353. • Measure DC conductors carrying up to 1000 VDC. Turn the Range Selector Switch to 1000 DCV setting. Follow the directions above under “AC Voltage Measurements”, only use the DC settings instead. SKU 69096 For replacement parts, please call 1-800-444-3353.
• Plug the red Test Lead into the VΩmA (Center) Jack. Plug the black Test Lead into the Com (Bottom) Jack. Switch the Multimeter ON. Connect the red probe to the anode of the diode and the black to the cathode. SKU 69096 For replacement parts, please call 1-800-444-3353. • Pull battery/fuse out of unit and replace with the same.
Metal roof hatch pattern for autocad. (9V battery or 500mA/250V fast-acting fuse) Replace cover and retighten screws. NOTE: No replacement parts are available for this tool.
SKU 69096 For replacement parts, please call 1-800-444-3353.
...">Cen Tech Digital Multimeter 69096 Manual(04.05.2019)No portion of this manual or any artwork contained herein may be reproduced in any. SKU 69096 For replacement parts, please call 1-800-444-3353. A properly used multimeter measures both voltage and current for alternating current, or AC. The multimeter also measures voltage and current for direct current, or DC. Electronic hobbyists can also test diodes, resistors and transistors with the Cen-Tech 92020 digital multimeter.
Originally recorded March 22, 2014. This is a review of the Harbor Freight Cen-Tech 7 Function Digital Multimeter, Item # 6.
It likely also applies to its bigger brother, the 7 Function Digital Multimeter With Backlight, Item # 92020. This is a basic VOM. It's not necessarily of the greatest quality, but it can give you some reasonable measurements. Oftentimes, they have this item for FREE with a coupon, and for the low, low price of free you can't beat it. The best part is this meter is adjustable, which means you can make it read even closer to the actual measurement, if of course you already have a higher quality meter. It's great to have a few of these around, you can keep them in several places so you'll always have one on hand, such as the car, garage, workbench, basement, etc.
• 7 FUNCTION DIGITAL MULTIMETER 69096 OPERATING INSTRUCTIONS Visit our Web site at REV 12a Copyright 2011 by Harbor Freight Tools. All rights reserved. © ® No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. • Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Warnings continued on page 3. SKU 69096 For replacement parts, please call 1-800-444-3353. • Any part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not operate properly. SKU 69096 For replacement parts, please call 1-800-444-3353. • Do not test voltage on AC circuits higher than 750 volts. Do not test voltage on DC circuits higher than 1000 volts.
Opmanager license file crack free. Do not test current on circuits higher than 10 amps. SKU 69096 For replacement parts, please call 1-800-444-3353. • Measure DC conductors carrying up to 1000 VDC. Turn the Range Selector Switch to 1000 DCV setting. Follow the directions above under “AC Voltage Measurements”, only use the DC settings instead. SKU 69096 For replacement parts, please call 1-800-444-3353.
• Plug the red Test Lead into the VΩmA (Center) Jack. Plug the black Test Lead into the Com (Bottom) Jack. Switch the Multimeter ON. Connect the red probe to the anode of the diode and the black to the cathode. SKU 69096 For replacement parts, please call 1-800-444-3353. • Pull battery/fuse out of unit and replace with the same.
Metal roof hatch pattern for autocad. (9V battery or 500mA/250V fast-acting fuse) Replace cover and retighten screws. NOTE: No replacement parts are available for this tool.
SKU 69096 For replacement parts, please call 1-800-444-3353.
...">Cen Tech Digital Multimeter 69096 Manual(04.05.2019)